Meshtastic QR Generator

Decode Meshtastic URLs from text or QR codes, or create new URLs with custom settings

Create a Meshtastic URL with up to 8 channels. Channel 0 is Primary, channels 1-7 are Secondary.

Number of Channels:

Use LoRa Presets (applies to all channels) Enable to use predefined LoRa settings for all channels. Leave unchecked to configure manually.

LoRa Preset: Controls radio modulation parameters (bandwidth, spread factor, coding rate)

Frequency Slot: Channel number (0 = auto-select based on channel name hash, 1-255 = specific slot)

Hop Limit: Maximum number of hops (0-7)

TX Power (dBm): Transmit power in dBm (0-30)

Transmit Enabled Enable transmission (uncheck for receive-only mode)

RX Boosted Gain (SX126x) Boost receive sensitivity for SX126x radios

Region: Select the regulatory region for frequency compliance

Modem Preset:

Bandwidth (kHz):

Spread Factor:

Coding Rate:

Frequency Offset: Frequency offset in Hz (typically 0)

Frequency Slot: Channel number (0 = auto-select based on channel name hash, 1-255 = specific slot)

Hop Limit: Maximum number of hops (0-7)

Override Frequency (MHz): Override the default frequency for your region (optional)

Transmit Enabled Enable transmission (uncheck to make this node receive-only)

RX Boosted Gain (SX126x) Boost receive sensitivity for SX126x radios (may increase power consumption)

TX Power (dBm): Transmit power in dBm (0-30, higher values = more range but more power consumption)

Region: Select the regulatory region for frequency compliance

🌐 Meshtastic QR Generator